Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs on an Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Tail light bulb

Replacing the brake light bulbs on an Opel Mokka, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by opening the boot lid, then, using a small flat-head screwdriver, disengage the side panel of the compartment. Next, grasp the outermost bulb holder, turn it slightly counterclockwise, and separate it from the headlamp. At this point, simply disconnect the connector, insert the replacement, and reassemble everything.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on the Opel Mokka A
How to Replace the Front Headlight Bulb on the Opel Mokka A
Vauxhall Mokka (2012-2019 / Mokka A) If one of the front headlight bulbs on your Opel Mokka A (2012-2019) has stopped working and you want to learn how to replace it correctly, follow th…
How to Reset the "Service" Light on an Opel Mokka
How to Reset the "Service" Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, sit in the driver's seat of your Opel Mokka. Start by activating the instrument cluster by turning the key to position one. Next, p…
How to Remove the Front Brake Pads on an Opel Mokka
How to Remove the Front Brake Pads on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you can start, lift the front of your Opel Mokka. Begin by removing the front wheel by unscrewing the fastening bolts. Next, unscrew and remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos