Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Opel Vivaro MK2

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Warning light – error code

In this video, see how to reset the instrument cluster on the Opel Vivaro MK2 regarding the maintenance light: turn on the ignition and scroll through the menu on the display using the upper button of the satellite located on the lever to the right of the steering wheel. Select "remaining distance to next service". Press one of the two satellite buttons for ten seconds. Wait for the button to stop flashing: it will display the message for the next service interval in time and mileage. Release the button and turn off the ignition. The procedure is complete.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Opel Vivaro
How to reset the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light of an Opel vehicle is a very simple and quick operation that is carried out after performing the car service. The service…
How to reset the service light on the Opel Vivaro
How to reset the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light related to the car service of the Opel Vivaro is a very simple operation, which can be done independently thanks to our s…
How to Reset the Service Light on the Opel Vivaro?
How to Reset the Service Light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To reset the Service light on the Opel Vivaro, press and hold the CHECK button located in the centre of the instrument cluster while it is off. Conti…

Other guides you may be interested in

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where to find the radio code of the Opel Vivaro? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos