Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Opel Corsa B Heating Not Working Due to Blocked Heater Matrix

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Radiator

In this video, you will see the cause of the heating failure in this Opel Corsa B; the heater matrix is blocked, resulting in only cold air coming out. The YouTuber removed the expansion tank (which is connected to the chassis by only two bolts) and then flushed the matrix with running water. It is important not to let the fluid from the expansion tank or the flushing of the matrix spill onto the ground; collect it in a large container as it is highly polluting and must be disposed of at an authorised centre. After cleaning, replace the expansion tank and refill the coolant according to the manufacturer's specifications (approximately three litres will be needed).

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Heating Radiator from the Opel Corsa
Removing the Heating Radiator from the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Follow the procedure to remove and replace the heating radiator in the Opel Corsa. First, open the bonnet of your car and disconnect the radiator flu…
Replacing the Heater Radiator on an Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Replace the heater radiator if warm air no longer works, here's how. Remove the plastic covers from the central tunnel (near the pedals). Unscrew the…
How to Replace the Heater Radiator on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video, we will discover the steps to dismantle and replace the internal heater radiator on the Opel Corsa D. First, get inside the vehicle an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos