Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Opel Combo

Model: Vauxhall Combo Combo C, MK 3 - Years 2001-2011
Part: Brake pads

This guide shows you the steps to remove and replace the front brake pads on the Opel Combo, following the instructions below. First, lift the vehicle and start by removing the front wheel; then unscrew the fixing screws located on the back of the brake caliper, detaching it from the disc, as illustrated in the video. At this point, press the caliper piston to retract it, removing the old brake pads; clean the caliper of any residual dirt and install the new original brake pads, refitting the braking system!

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Opel Combo 2018
How to replace the rear headlight bulb of the Opel Combo 2018
Vauxhall Combo (2012-2018 / Combo D, MK 4) If you want to replace the rear headlight bulb of your Opel Combo (year 2018) by yourself, just follow the procedure described in the following guide…
How to Remove the Door Panel and Window Handle on an Opel Combo
Vauxhall Combo (2001-2011 / Combo C, MK 3) Below are the instructions necessary to remove and replace the door panel and window handle on an Opel Combo. First, open the front door and start by…
How to Reset the Service Light on the Opel Combo
How to Reset the Service Light on the Opel Combo
Vauxhall Combo (2012-2018 / Combo D, MK 4) In today's video, see how to reset the service light on the Opel Combo; this tutorial also applies to the Fiat Doblò of the same era. First, enter yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos