Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Zafira
    4. : Replacement of the rear headlight bulb of the Opel Zafira

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira MK 2, Zafira B, A05 - Years 2005-2011
Part: Rear light bulb
Operation: Replacement of the rear headlight bulb of the Opel Zafira

The instructions provided in this guide will show us how to disassemble and replace the bulbs of the rear headlight of the Opel Zafira. First, we open the rear tailgate of the trunk and start unscrewing the screws of the rear headlight, thus removing the side cover of the luggage compartment; then we disconnect the electrical connector of the bulbs and remove the rear light, as shown in the video. At this point, we separate the bulb holder from the light fixture, removing and replacing any faulty bulbs with new ones (having the same attachment); then we reassemble everything!


Posted on 7 February 2024 by ScegliAuto



How to replace the headlight bulb on an Opel Zafira
Vauxhall Zafira (2011-2019 / MK 3, Zafira C) Before we begin, we will have to open the front hood of our Opel Zafira. So let's start by unscrewing and removing the rear cover of the burnt out he
Replacement of the front headlight bulb on the Opel Zafira.
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) In this video tutorial, we will see how to disassemble and replace the headlight bulb of the Opel Zafira, following the instructions below. First, we
How to replace the rear light bulb on the Opel Zafira B?
Vauxhall Zafira (2005-2011 / MK 2, Zafira B, A05) In order to replace the rear light bulb of the Opel Zafira you have to open the tailgate so that you can detach the panel inside the trunk, in corres

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos