Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjustment of the Handbrake on the Opel Meriva A

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Parking brake

See other generations:
Video tutorial

Over time, the metal cable connecting the handbrake lever on the Opel Meriva may loosen, causing the lever to reach its limit without effectively locking the vehicle. Using a screwdriver, remove the panel from the glove compartment beneath the lever and disconnect the gaiter from the lever.

After securing the vehicle, lift the rear wheels. Using a 10 mm socket wrench with an extension, tighten the nut to the left of the handbrake lever and check the braking of the rear wheels by spinning them by hand.

Proceed by trial and error until you achieve locking with five clicks of the lever.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Activate and Deactivate the Electric Handbrake on an Opel Meriva
How to Activate and Deactivate the Electric Handbrake on an Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) This guide will show you how to activate and deactivate the electric handbrake on an Opel Meriva in a few simple steps. To engage the handbrake, ensu…
Where is the OBD2 Port on the Opel Meriva A?
Where is the OBD2 Port on the Opel Meriva A?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Knowing the location of the OBD2 port on your Opel Meriva A is very important as it allows you to connect any compatible diagnostic tool to identify …
Where is the OBD socket and fuse box of the Opel Meriva?
Where is the OBD socket and fuse box of the Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) The OBD port on an Opel Meriva model B is located inside the cabin, specifically under a cover for the handbrake. To access the socket, remove the co…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos