Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Daytime Running Light on the Opel Adam

Model: Vauxhall Adam MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

This video is currently unavailable

In this video, we see how to replace the bulb for the daytime running light on an Opel Adam. First, open the bonnet and notice that the headlight units are secured to the body with a peculiar fastening using a plastic extension of the headlight unit that extends to the middle of the bonnet.

Towards the middle of this bar, behind a cover, you will find a screw that turns counter-clockwise, located at the end of the headlight unit: this is where the daytime running light for your vehicle is positioned, and it is 21W/5W. If you need to change it, remember to never touch the bulb with bare hands to avoid damaging it!


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Vauxhall Adam (2013-2019 / MK 1) To manually reset the maintenance light on your Opel Adam, it only takes a few seconds, and with the following instructions, you will complete the op…
Vauxhall Adam (2013-2019 / MK 1) In this video, you will see the main instructions to reset the service light for the regular maintenance oil change of an Opel Adam. First, get insid…
Vauxhall Adam (2013-2019 / MK 1) To reset the Service light on an Opel Adam, turn on the ignition by turning the key in the ignition switch. Once the dashboard is on, scroll through …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos