Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the boot release button on the Opel Meriva

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Push button

See other generations:
Video tutorial

Today, we will go through the instructions to remove and replace the boot release button on the rear hatch of the Opel Meriva. First, open the rear hatch and start by removing the rear hatch panel by unscrewing the fixing screws; then, remove the panel with the release button by disconnecting the electrical connector to remove it and replace it with the new one, as shown in the video.

At this point, install the new button and the rear hatch cover, following the video tutorial to the end!


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Replacement of the trunk opening button of the Opel Meriva.
Replacement of the trunk opening button of the Opel Meriva.
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the trunk opening button of the Opel Meriva. First of a…
Instructions for removing the boot button on Opel Meriva B
Instructions for removing the boot button on Opel Meriva B
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this video, we will see the instructions that will allow you to remove and replace the tailgate opening button on an Opel Meriva B, second series.…
How to Replace the Switch on an Opel Meriva
How to Replace the Switch on an Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) How to replace the switch located in the tailgate of an Opel Meriva? In this video, see how to disassemble it. Open and lift the tailgate of your car…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos