Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Switch on an Opel Meriva

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Push button

See other generations:
Video tutorial

How to replace the switch located in the tailgate of an Opel Meriva? In this video, see how to disassemble it. Open and lift the tailgate of your car, use a screwdriver to unscrew the securing screws in the plastic panel (where the handles are and around the perimeter).

Remove the plastic from the tailgate of the boot (use a plastic lever), disconnect any power connectors.

Remove the faulty switch and install a new one. Proceed in reverse order for reassembling the plastics and associated parts.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Service light reset on an Opel Meriva A
Service light reset on an Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Resetting the service light on an Opel Meriva A is straightforward due to the ease of the procedure. In the video provided, you can see the few steps…
How to reset the Service light on the Opel Meriva?
How to reset the Service light on the Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To reset the Service light on the Opel Meriva, press and hold the button located on the dashboard, between the speedometer and the fuel gauge: keep t…
How to Reset the Service on the Opel Meriva A?
How to Reset the Service on the Opel Meriva A?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Resetting the service on the Opel Meriva A, the first model produced between 2003 and 2010, is done through the odometer button. This is located on t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos