Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Fitting a Pop-Top Roof

Model: Vauxhall Vivaro MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

The video shows how to make your van more comfortable by adding a pop-top roof, allowing you to stay cooler in summer. The primary operation is to prepare the surface of the original roof by cleaning it thoroughly; then, after taking measurements, cut the original sheet metal with a jigsaw.

Once done, install the supports for the new roof using self-tapping screws, and apply the adhesive and silicone provided in the kit. Then, fit the pop-top roof, and the job is complete. The installation video is performed on a long wheelbase Opel Vivaro.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) These short and simple instructions will show us how to reset the AdBlue fluid top-up warning on the Opel Vivaro. First of all, we get into the vehic…
Vauxhall Vivaro (2014-2019 / MK 2) Today we will discover the instructions that will allow us to top up the AdBlue liquid, consequently resetting the message on the display of the Opel…
Vauxhall Vivaro (2014-2019 / MK 2) To reset the service of the Opel Vivaro, start by turning on the instrument cluster. Use the lever on the right of the steering wheel that controls t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos