Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service of the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Service warning light

To reset the service of the Opel Vivaro, start by turning on the instrument cluster. Use the lever on the right of the steering wheel that controls the wipers. Press the outer top button of the lever until 'service intervals' appears. Keep holding the same outer top button until 'oil change in.' appears. Once this message is displayed, press and hold the same outer top button again until the new mileage flashes. At this point, you can turn off the instrument cluster, then turn it back on to verify that the service has been reset.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic computer. To reset the…
Reset the service warning of the Opel Vivaro.
Reset the service warning of the Opel Vivaro.
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In a few steps, we will see the procedure that will allow us to reset the service maintenance light for the oil change on the Opel Vivaro. First, we …
How to reset the service light on the Opel Vivaro
How to reset the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light of an Opel vehicle is a very simple and quick operation that is carried out after performing the car service. The service…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos