Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Service warning light

Resetting the service light related to the car service of the Opel Vivaro is a very simple operation, which can be done independently thanks to our short video tutorial. To reset the service light, we need to: - turn on the instrument panel; - press the SET button, located on the right lever of the steering wheel; - hold it down for about 10 seconds; - release the button when the service message starts flashing; Finally, wait a few seconds for the light to turn off. Complete the reset by turning off and on the vehicle's instrument panel.

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Opel Vivaro
How to reset the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light of an Opel vehicle is a very simple and quick operation that is carried out after performing the car service. The service…
How to reset the service light on the Opel Vivaro
How to reset the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light on an Opel Vivaro is a very simple operation. To reset the light, you need to: - close all the doors of the vehicle; - tu…
How to reset the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) The steps to reset the service light of the Opel Vivaro model produced from 2014 to 2019 are the same steps used to reset the service light of a Rena…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos