Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Throttle Cable and Air Filter Box on a Peugeot Speedfight 2

Model: Peugeot Speedfight
Part: Accelerator

Video tutorial

In this video, you will see how to dismantle the throttle cable and the air filter box on a Peugeot Speedfight 2 scooter with a carburettor. First, remove the air filter box by unscrewing the side fixing screws with a socket spanner; once the box is removed from the carburettor, disconnect its throttle cable.

Next, unscrew the carburettor head: then extract the slide along with the spring and the conical needle. Finally, release the internal mechanism to remove the throttle cable from the slide.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Remove the Carburettor from the Peugeot Speedfight
How to Remove the Carburettor from the Peugeot Speedfight
Speedfight Today's steps will show you how to disassemble and replace the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre …
How to Remove the Carburettor from a Peugeot Speedfight
How to Remove the Carburettor from a Peugeot Speedfight
Speedfight Start by removing the air filter block from your Peugeot Speedfight, which is connected to the carburettor. Next, disconnect the various hoses connec…
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
How to Dismantle and Clean the Carburettor of the Peugeot Speedfight
Speedfight This guide provides instructions to dismantle and clean the carburettor of the Peugeot Speedfight scooter. First, place the scooter on the centre sta…

How to Replace the O-ring on the Clutch Rod of the LML Star?

To replace the O-ring on the clutch rod of the LML Star, lift the bike to loosen the side panel located near the rear wheel. Next, unscrew all the screws securing the rear wheel and the corresponding transmission cover: by removing the clutch, you will be able to locate the rod positioned behind it. This rod can now be removed from its housing by unscrewing the fastening screws; after the old rod has been removed, slide out the O-ring, replace it with a new one, and reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos