Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will learn how to remove the rear light on a Peugeot Speedfight scooter by following these simple instructions. First, open the seat of your scooter and unscrew all the fixing screws found in the side fairing and at the bottom of the front light; once the fairing is removed, disconnect the electrical connector of the bulb while also extracting the rear light, as shown in the video. All that remains is to unscrew the fixing screws to separate the light from the fairing; follow the video to the end for the installation of a new light!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Variator on a Peugeot Speedfight
Removing the Variator on a Peugeot Speedfight
Speedfight In today's tutorial video, you will see the steps that will allow you to remove the variator from a Peugeot Speedfight scooter. First, position your …
How do you disassemble the engine of the Peugeot Speedfight?
How do you disassemble the engine of the Peugeot Speedfight?
Speedfight The disassembly of the Peugeot Speedfight engine can be done by loosening the screws that hold it to its housing: once these screws have been loosene…
Replacement of the rollers and variator of the Peugeot Speedfight 50
Replacement of the rollers and variator of the Peugeot Speedfight 50
Speedfight Today's instructions will show us the process of disassembling and replacing the rollers and variator of the Peugeot Speedfight 50 scooter. First, we…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos