Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Citystar 125
Part:

To replace the rear mudguard on the Peugeot Citystar 125, loosen the screws located on the side of the mudguard using a socket spanner. This will be used to loosen the screws on the side of the clutch and also on the side where the variator is located. This way, the mudguard can be freed and removed from the side of the bike. Once the old piece is removed, replace it with a new one, which should be properly secured with the appropriate bolts. After installation, check that it is firmly attached to its housing.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Mudguard on the Peugeot Citystar 125?
How to Replace the Front Mudguard on the Peugeot Citystar 125?
Citystar 125 To replace the front mudguard on the Peugeot Citystar 125, loosen the screws that secure it to its housing. These screws are located in the centre of…
How to Replace the Front Brake Disc on a Peugeot Citystar 125
How to Replace the Front Brake Disc on a Peugeot Citystar 125
Citystar 125 To replace the front brake disc on a Peugeot Citystar 125, first, remove the screws that secure the mudguard at the top of the front wheel. Once the …
How to Replace the Rear Shock Absorber on the Peugeot Citystar 125?
How to Replace the Rear Shock Absorber on the Peugeot Citystar 125?
Citystar 125 To replace the rear shock absorber on the Peugeot Citystar 125, lift the seat to access the internal compartment beneath it. Here, you will find the …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos