Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seat and Helmet Compartment of the Peugeot Speedfight 2

Model: Peugeot Speedfight 2
Part: Seat

Video tutorial

Below are the main instructions for removing and replacing the seat and helmet compartment of the Peugeot Speedfight 2 scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws found on the sides of the helmet compartment; then unscrew the seat screws to remove it, as shown in the video.

At this point, unscrew the fuel cap and remove the side plastics of the compartment, thus gaining access to the upper part of the engine; then reassemble everything by applying the reverse procedure!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Piston on a Peugeot Speedfight 2
How to Replace the Piston on a Peugeot Speedfight 2
Speedfight 2 To replace the piston on a Peugeot Speedfight 2, loosen the bolts that secure the seat and the corresponding protective panel in the under-seat compa…
How do you disassemble the engine of the Peugeot Speedfight 2?
Speedfight 2 The disassembly of the engine of the Peugeot Speedfight 2 can be carried out by loosening the screws that fix it to its housing, thus freeing the eng…
How to Replace the Crankshaft on the Peugeot Speedfight 2?
How to Replace the Crankshaft on the Peugeot Speedfight 2?
Speedfight 2 To replace the crankshaft on the Peugeot Speedfight 2, loosen the bolts securing the engine block to its housing, disconnecting all connectors and ho…

How to remove the seat on a Yamaha Tracer 9 GT?

In this tutorial, you can see how to remove the seat on a Yamaha Tracer 9 GT, a very simple and quick operation, for example, if you need to access the battery. First, remove the passenger seat by inserting the key into the designated lock, then locate the indicated rubber element and remove it by pulling it outwards. Next, insert your hand into the indicated gap, hold down the release lever, and simultaneously detach the seat from the support. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos