Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the rear wheel of the Peugeot Citystar 125, first remove the securing ring that connects the end of the exhaust to the rest of the exhaust system. This will allow you to remove the exhaust and access the components behind it: the support bracket must be removed by unscrewing its fixing screws, giving access to the bolts that secure the wheel. Once these have been loosened, you can completely remove the wheel and replace it with a new one; after replacement, reassemble all previously removed components.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Rear Wheel of the Peugeot Citystar 125
How to Dismantle the Rear Wheel of the Peugeot Citystar 125
Citystar 125 Today's guide will show you the steps to dismantle and replace the rear wheel and tyre of the Peugeot Citystar 125 scooter. First, place your scooter…
How to Change the Engine Oil of the Peugeot Citystar 125
How to Change the Engine Oil of the Peugeot Citystar 125
Citystar 125 To change the engine oil of the Peugeot Citystar 125, remove the oil drain plug located at the bottom of the bike between the stand and the rear whee…
How to Remove the Fork of the Peugeot Citystar 125?
How to Remove the Fork of the Peugeot Citystar 125?
Citystar 125 To remove the fork of the Peugeot Citystar 125, you need to unscrew the nut that secures the central axle of the front wheel, allowing it to be compl…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos