Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief and simple guide, you will learn how to disassemble and replace the fork seals on the Peugeot Elystar 50 scooter. First, place your scooter on the centre stand and begin disassembling the fork by removing the front wheel and taking off the top part of the handlebars; unscrew the screws and then slide out the forks. At this point, remove the fork seals and consequently replace the oil; then reassemble the stanchion onto the fork before reinstalling them onto the scooter, finally reattaching the front wheel and the entire handlebar assembly!

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Carburettor of a Peugeot Elystar
How to Replace the Carburettor of a Peugeot Elystar
Elystar 50 Before you begin, remove the left side fairing of your Peugeot Elystar. This will give you access to the carburettor. Start by disconnecting the rele…
How to Replace the Rollers in the Variator of the Peugeot Elystar 50
How to Replace the Rollers in the Variator of the Peugeot Elystar 50
Elystar 50 In this video tutorial, you will learn how to disassemble and replace the rollers in the variator of the Peugeot Elystar 50 scooter in simple and qui…
How to Remove the Clutch Bell on a Peugeot Elystar 50
How to Remove the Clutch Bell on a Peugeot Elystar 50
Elystar 50 Today, see the steps that will allow you to remove and replace the clutch bell on a Peugeot Elystar 50 scooter. First, place the scooter on its centr…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos