Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the hydraulic power steering pump of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Pump

Today we will discover the main steps useful for disassembling and replacing the hydraulic power steering pump of the Peugeot 206. First of all, we open the hood of the car and start by disconnecting the service belt connected to the power steering pump; then we unscrew the fixing screws of the pump to remove it, also disconnecting the hydraulic tubing, as shown in the video. At this point, we install the new hydraulic power steering pump, connecting the belt and finally topping up with the new suitable fluid, unscrewing the cap and filling up to the level!

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator on a Peugeot 206
How to Replace the Alternator on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) First, release the bonnet using the lever and lift it. Next, remove the cover on the side of the exhaust pipes. Disconnect the battery terminals, the…
How to Activate the Fog Lights of a Peugeot 206
How to Activate the Fog Lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…
How to Change the Gear Oil on a Peugeot 206
How to Change the Gear Oil on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video tutorial, see how to change the gear oil on a Peugeot 206 1.4 HDi. Lift the bonnet and secure it with the prop rod. Remove the air duct…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos