Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Power Steering Pump and Reservoir from a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Pump

In this video tutorial, you will see how to remove the power steering pump and reservoir from a Peugeot 206 in simple steps. First, open the bonnet and locate the reservoir; then disconnect the power steering fluid hose found at the bottom of the reservoir. Next, remove the side protection cover and unscrew the fastening screws of the pump itself; also unscrew any additional screws found inside the side pulley. Finally, extract the pump along with the reservoir, as shown in the video!

Updated on 26 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the hydraulic power steering pump of the Peugeot 206
Replacement of the hydraulic power steering pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will discover the main steps useful for disassembling and replacing the hydraulic power steering pump of the Peugeot 206. First of all, we o…
Where is the power steering fluid reservoir located on the Peugeot 206?
Where is the power steering fluid reservoir located on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The reservoir containing the power steering fluid on the Peugeot 206 is obviously located inside the engine compartment: here it will be possible to …
Where to Find and How to Replace the Power Steering Reservoir on the Peugeot 206
Where to Find and How to Replace the Power Steering Reservoir on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide will provide useful information for checking and replacing the power steering oil or reservoir on the Peugeot 206. First, open the bonnet …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos