Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Pump

To replace the water pump on the Peugeot 206, open the bonnet to access the components located on the left side of the engine block: here you will find the timing belt with its pulleys. By loosening the nuts that secure the water pump pulley, you can remove the pump from its housing to replace it with a new one; once it is installed, secure it with the appropriate screws, reposition the belt around its pulley, and check that it operates correctly.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Water Pump on Peugeot 206
Removing Water Pump on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the water pump on a Peugeot 206, here's how. Lift the bonnet and secure it, then remove the wheel. Use a screwdriver to remove the rivets fro…
How to Replace the Water Pump on a Peugeot 206
How to Replace the Water Pump on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the water pump on a Peugeot 206, open the bonnet to disconnect the hoses connected to the radiator and completely remove it, allowing the …
Replacement of the fuel pump of the Peugeot 206
Replacement of the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This short and simple procedure will show us how to disassemble and replace the fuel pump of the Peugeot 206, as well as the Citroen C3. First, we op…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos