Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Water Pump on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Pump

Replace the water pump on a Peugeot 206, here's how. Lift the bonnet and secure it, then remove the wheel. Use a screwdriver to remove the rivets from the splash guard, take off the cover panel, and access the pump. Remove the belts. Start to undo the water pump retaining bolts with a socket wrench. Once the part is removed from its seat, disconnect the power connectors and take it out. Fit the new water pump in the engine bay. Refit the cover panel under the wheel arch and reattach the wheel.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a Peugeot 206
How to Replace the Water Pump on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the water pump on a Peugeot 206, open the bonnet to disconnect the hoses connected to the radiator and completely remove it, allowing the …
How to Replace the Coolant Temperature Sensor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the coolant temperature sensor on a Peugeot 206, open the bonnet to access the components in the engine bay. The coolant temperature senso…
How to Replace the Water Pump on the Peugeot 206
How to Replace the Water Pump on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the water pump on the Peugeot 206, open the bonnet to access the components located on the left side of the engine block: here you will fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos