Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Temperature Sensor on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Engine coolant temperature sensor

To replace the coolant temperature sensor on a Peugeot 206, open the bonnet to access the components in the engine bay. The coolant temperature sensor is blue and located in the centre of the engine block, next to the oil dipstick. Disconnect the sensor from its power cable and rotate it counterclockwise to remove it. After removal, insert the new sensor into its housing, connect it to the plug, and ensure it is functioning.

Updated on 2 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Coolant Temperature Sensor on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the coolant temperature sensor on a Peugeot 206, open the bonnet to access the components inside the engine bay. The coolant temperature s…
How to Change the Coolant Temperature Sensor on a Peugeot 206
How to Change the Coolant Temperature Sensor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the coolant temperature sensor on a Peugeot 206, it is advisable to work with the engine completely cold. After opening the bonnet, locate…
How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos