Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Pump

To replace the water pump on a Peugeot 206, open the bonnet to disconnect the hoses connected to the radiator and completely remove it, allowing the coolant to drain out. This will give you access to the water pump, which must be removed from its housing by unscrewing the bolts that secure it. Once the old pump has been removed, insert the new one, and refit all the parts that were previously removed, ensuring everything functions correctly.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Water Pump on Peugeot 206
Removing Water Pump on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the water pump on a Peugeot 206, here's how. Lift the bonnet and secure it, then remove the wheel. Use a screwdriver to remove the rivets fro…
How to Replace the Water Pump on the Peugeot 206
How to Replace the Water Pump on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the water pump on the Peugeot 206, open the bonnet to access the components located on the left side of the engine block: here you will fi…
How to dismantle the fuel pump of the Peugeot 206
How to dismantle the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at the procedure necessary to dismantle and replace the fuel pump of the Peugeot 206. First, open the rear doors and start by removing the…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos