Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Clean the Washer Reservoir on a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

To dismantle and replace the washer reservoir on a Peugeot 206, pull off the neck of the reservoir by opening the engine bay and disconnect the tube that leads down to the engine compartment. Next, lift the car with a jack and remove the passenger side wheel arch to access the screw securing the reservoir. Once extracted, the reservoir can be cleaned with a mixture of boiling water and coarse salt, as recommended in the video. After cleaning, the reservoir can be reinserted into its place, and finally, remount the wheel arch and the wheel.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Washer Fluid Reservoir on the Peugeot 206?
How to Replace the Windscreen Washer Fluid Reservoir on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To remove the windscreen washer fluid reservoir on the Peugeot 206, loosen the bolts securing the right front wheel and completely remove the wheel. …
How to remove the windshield washer fluid tank of the Peugeot 206
How to remove the windshield washer fluid tank of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) When it is necessary to replace the bulb of the right front headlight of a Peugeot 206 vehicle, it is necessary to remove the windshield washer fluid…
How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos