Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Fluid Reservoir on the Peugeot 206?

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

To remove the windscreen washer fluid reservoir on the Peugeot 206, loosen the bolts securing the right front wheel and completely remove the wheel. Once the wheel is off, you can also remove the washer pump to access the reservoir behind it. After removing its securing bolts and the connected hoses, you can extract the old reservoir and replace it with a new one. After the replacement, reassemble all the components that were previously removed.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to remove the windshield washer fluid tank of the Peugeot 206
How to remove the windshield washer fluid tank of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) When it is necessary to replace the bulb of the right front headlight of a Peugeot 206 vehicle, it is necessary to remove the windshield washer fluid…
How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…
How to Dismantle and Clean the Washer Reservoir on a Peugeot 206?
How to Dismantle and Clean the Washer Reservoir on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To dismantle and replace the washer reservoir on a Peugeot 206, pull off the neck of the reservoir by opening the engine bay and disconnect the tube …

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos