Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check and top up the coolant in the Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Antifreeze coolant

In this tutorial we can see how to check and top up the coolant in the Peugeot 307, an extremely simple and quick operation. First of all, make sure that the engine is completely cold, then open the hood, locate the expansion tank on the passenger side and check that the level of the liquid is between the "MIN" and "MAX" markings. If it is below, unscrew the black cap and pour the necessary amount of liquid into the tank, also taking care to use the right type, which varies depending on the season and location of use.

Posted on 25 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the coolant temperature sensor of the Peugeot 307 1.6 HDi.
Replacement of the coolant temperature sensor of the Peugeot 307 1.6 HDi.
Peugeot 307 (2001-2009 / MK 1) This short and simple guide will show us how to disassemble and replace the coolant temperature sensor of the Peugeot 307 1.6 HDi. First, we open the…
How do you repair the convertible top of the Peugeot 307 CC?
How do you repair the convertible top of the Peugeot 307 CC?
Peugeot 307 (2001-2009 / MK 1) To repair the Peugeot 307 convertible top, you must first check that the actuators of the mechanism are not damaged: these will be located at the rea…
How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
Peugeot 307 (2001-2009 / MK 1) Following the instructions provided in this guide, we will see how to disassemble and replace the engine coolant temperature sensor of the Peugeot 30…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos