Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Additive on a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel particulate filter

Video tutorial

How do you top up the tank of the particulate filter (with additive) on a Peugeot 307? In this guide, follow these steps to proceed with the top-up. Lift the car using a column lift, unscrew the bolts of the DPF with a socket wrench, and disconnect the empty bag from the container.

Top up the container with new liquid and reattach it to the DPF, then screw it back onto the vehicle body.

Lower the car to the ground, enter the vehicle, and use a diagnostic tool to reset the service light. Once all verification procedures are complete, disconnect the tester from the connector.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Check and Top Up the Coolant in the Peugeot 307?
How to Check and Top Up the Coolant in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In this tutorial, you will see how to check and top up the coolant in the Peugeot 307, a very simple and quick operation. First, ensure that the engi…
Guide to Replacing the Radiator on the Peugeot 307 2.0 HDi
Guide to Replacing the Radiator on the Peugeot 307 2.0 HDi
Peugeot 307 (2001-2009 / MK 1) In this guide, we will outline the instructions for removing and replacing the engine cooling radiator on the Peugeot 307. First, open the bonnet of …
Where is the fuse box located in the Peugeot 307
Where is the fuse box located in the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To find the fuse box in your Peugeot 307, follow the steps outlined in this guide. First, open the glove compartment on the passenger side and locate…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos