Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel on a Peugeot Partner Tepee?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car door

See other generations:
Video tutorial

Watching this video guide, it is immediately apparent that removing the inner door panel of the rear door is not difficult, and indeed it is quite straightforward. The hex head screws around the inner handle are the main focus; once these are unscrewed and the perimeter clips of the panel are removed, the job can be considered complete, as you simply need to grasp it and pull it away to detach it completely.

This allows access to the inside of the door for any necessary work.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Disassembly of the rear tailgate panel of the Peugeot Partner Tepee
Disassembly of the rear tailgate panel of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Today we will see the main instructions that will allow us to disassemble and remove the internal panel of the rear door of the Peugeot Partner Tepee…
How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
Removing the Front Door Panel of the Peugeot Partner Tepee
Removing the Front Door Panel of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) These instructions will allow you to remove and replace the front door panel of the Peugeot Partner Tepee. First, open the front door and start by re…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos