Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset and calibrate the panoramic roof closure of the Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Let's go through the steps to reset and subsequently calibrate the closure of the panoramic roof of the Peugeot 508. First, get in the vehicle and start the engine; then close the panoramic roof using the designated button located on the ceiling console, as shown in the video.

Once the panoramic roof is completely closed (even if not perfectly), hold the closure button for five seconds; this will calibrate the closing motor of the blind.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to calibrate the panoramic roof blind in the Peugeot 508?
How to calibrate the panoramic roof blind in the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial we can see how to calibrate the panoramic roof blind in the Peugeot 508, an extremely simple and quick operation, to be carried out …
How to reset the panoramic roof blind of the Peugeot 508
How to reset the panoramic roof blind of the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this guide we will see the instructions that will allow us to reset the motor of the sunroof blind of the Peugeot 508. First of all, we get on boa…
How to reset maintenance on a Peugeot 508
How to reset maintenance on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) Today we will see how to reset the maintenance interval of a Peugeot 508, second generation model produced from 2018 onwards. The operation is very s…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos