Do it yourself
Frequently asked questions about cars and motorcycles

How to reset maintenance on a Peugeot 508

Model: Peugeot 508 MK 2 - Years 2018-2026
Part: Service warning light

Today we will see how to reset the maintenance interval of a Peugeot 508, second generation model produced from 2018 onwards. The operation is very simple to perform and we can do it independently and in just a few seconds without the use of external diagnostic tools, but let's see now how to proceed. First, we need to press and hold the left lever button on the steering wheel and then turn on the vehicle's ignition to the first position without starting it. Once we do this, we will see a timer of ten seconds appear, so we continue to hold down the previous button until the time expires to perform the reset, and finally restart the vehicle.

Posted on 5 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 508 (2010-2018 / MK 1) In these short steps, we will see the process of resetting and calibrating the panoramic roof closure of the Peugeot 508. First, we get into the car …
Peugeot 508 (2010-2018 / MK 1) This video shows the location of the fuse box for the Peugeot 508 and the corresponding fuse assignments. This video is suitable for both the 508 sal…
Peugeot 508 (2010-2018 / MK 1) How to turn off the warning light on the dashboard of a Peugeot 508? Let's see how to reset the maintenance light. Turn on the dashboard with the key…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos