Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Peugeot 508?

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Service warning light

To reset the "Service" light on a Peugeot 508, sit in the driver's seat and make sure the engine is off. Press and hold the button on the left side of the instrument panel. While continuing to hold the button, turn on the instrument panel without starting the engine. Keep the button pressed for about 10 seconds. During this time, you will see a countdown on the instrument panel display. When the countdown ends, the "Service" light should turn off, indicating that the reset has been successfully completed. Release the button and turn off the instrument panel. Turn on the engine again to verify that the "Service" light has been successfully reset. If the procedure was carried out correctly, the light should remain off.

Posted on 17 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this video tutorial, you can see how to reset the maintenance light on a Peugeot 508. If you see the SERVICE light and the spanner icon illuminate…
How to reset the service light on the Peugeot 508
How to reset the service light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) The service light activates on the vehicle when it is necessary to perform the car service, immediately after we can proceed with the reset of the se…
How to Reset the Service Light on the Peugeot 508
How to Reset the Service Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Resetting the service light for the car service on a Peugeot 508 follows simple and quick steps that can be done independently. Peugeot vehicles, lik…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos