Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the brightness of the speedometer on the Peugeot 508 MK1

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Instrument cluster

In this video, we see how to change the brightness of the speedometer on the instrument panel of the Peugeot 508 MK1, the model produced between 2010 and 2018. Between the speedometer and the tachometer, there are two buttons: the one on the left, closer to the tachometer, is used for this purpose. Press and hold it on the (-) side to decrease the brightness of the speedometer, and do the same on the (+) side to increase the brightness. This operation can be repeated during nighttime hours to decrease the brightness of the speedometer, which can be annoying in such circumstances.

Posted on 26 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads on Peugeot 508
Replacing Brake Pads on Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Are the rear brake pads on your Peugeot 508 worn out and in need of replacement? Let's see how to remove them. Lift the car on a column lift to the d…
How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To reset the service light on a Peugeot 508 - after completing the required services - close all four doors of the vehicle. Turn on the ignition: you…
How to Reset the Service Light on the Peugeot 508
How to Reset the Service Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To manually reset the service light on your Peugeot 508 Mk1, you only need a few seconds. The required procedure is very simple, and if you follow th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos