Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Service warning light

To reset the service light on a Peugeot 508 - after completing the required services - close all four doors of the vehicle. Turn on the ignition: you will see that the vehicle requests a service. At this point, turn off the ignition and press the "000" button on the right, near the speedometer. Turn on the ignition again: a countdown will start from 10. When it reaches zero, the service will be reset. To verify, simply turn off the ignition and then turn it back on. The service light will now be off.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) To reset the service light related to the service interval on a Peugeot 508 model R83, do the following: press the SET button on the left stalk of th…
How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Resetting the service light is an operation to perform after completing the maintenance activities, such as replacing the air and oil filters, toppin…
How to reset the service light on a Peugeot 508
How to reset the service light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) Resetting the service light on the Peugeot 508 is done via the dashboard display. With the ignition off, press and hold the "000" or "Trip" button on…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos