Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on a Peugeot 508?

Model: Peugeot 508 MK 2 - Years 2018-2026
Part: Service warning light

It will be possible to reset the Service warning light displayed on the instrument panel of the Peugeot 508 by holding down the button located on the left side of the steering wheel. While continuing to hold the button, you can turn on the instrument panel by pressing the button located on the center console. This way, you will notice a countdown starting from ten, during which you must continue to hold the button; at the end of the countdown, you can release the button to check that the Service warning light has completely disappeared.

Posted on 29 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on a Peugeot 508
How to reset the Service light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) Here’s how to reset the Service light on a 2022 Peugeot 508: the vehicle must be off, with the ignition turned off. Locate the button at the end of t…
How to Reset the Service Light on the Peugeot 508
How to Reset the Service Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To manually reset the service light on your Peugeot 508 Mk1, you only need a few seconds. The required procedure is very simple, and if you follow th…
How to Reset the Service Light on the Peugeot 508?
How to Reset the Service Light on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To clear the Service light that appears on the instrument cluster of the Peugeot 508, press the 000 button located on the right side of the instrumen…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos