Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

Video tutorial

In this video, learn how to perform the periodic replacement of the diesel filter on the Peugeot 206. Open the fuel tank cap, place the vehicle on a lift, and raise it to work underneath. Identify the filter and clean it with spray cleaner, placing a container underneath to catch any fuel spills.

Disconnect the two fuel lines from their supports, using a lever to detach them from the filter. Using a special pliers, remove the connection on the filter's hose.

Repeat the process with the outlet pipe, using a lever to remove the filter from its housing. Replace it with a new one, reconnect the hoses, secure them in their supports, lower the car, and close the cap.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Replacing the fuel pump on a Peugeot 206
Replacing the fuel pump on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let's look at removing the fuel pump from the Peugeot 206 located inside the fuel tank. Lift the front bonnet, disconnect the battery cables, then re…
Fuel Filter Replacement on Peugeot 206
Fuel Filter Replacement on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Open the fuel tank cover and unscrew the cap underneath. Lift the car with a jack, although it is better to use a ramp for this operation. Disconnect…
Replacing the Diesel Filter on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How do you replace the diesel filter on a Peugeot 206? Lift the cover of the engine compartment and see how to proceed. Remove the engine cover panel…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos