Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

This video is currently unavailable

How do you replace the diesel filter on a Peugeot 206? Lift the cover of the engine compartment and see how to proceed. Remove the engine cover panel and locate the diesel filter.

Unscrew the fastening screws on the side of the fuel filter to remove the entire housing or just the cap. Pull the filter out of its housing and disconnect the various circulation hoses. Once the filter is removed, replace it with a new one. Fit the filter back into its specific housing (connect the hoses and cables) and tighten the screws.

Start the vehicle and test its operation.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
How to Remove the Diesel Filter on a Peugeot 206 2.0 HDI
Peugeot 206 (1998-2012 / MK 1) Today's instructions will show you how to remove and replace the diesel filter on a Peugeot 206 2.0 HDI in simple steps. First, open the bonnet of th…
Replacing the Diesel Filter on the Peugeot 206
Replacing the Diesel Filter on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, learn how to perform the periodic replacement of the diesel filter on the Peugeot 206. Open the fuel tank cap, place the vehicle on a …
Instructions for Replacing the Diesel Filter
Instructions for Replacing the Diesel Filter
Peugeot 206 (1998-2012 / MK 1) To replace the diesel filter, first remove the plastic engine cover and locate the filter at the front of the engine. Completely unscrew the drain sc…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos