Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the oil service on a Peugeot 3008 Hybrid?

Model: Peugeot 3008 P64 - Years 2023-2026
Part: Checks and maintenance

In today's very short video guide, you will see how to perform a reset of the service on a latest generation Peugeot 3008 Hybrid in a few simple steps. Let's start the procedure by turning on the car's ignition without starting the engine, then press the "00" button on the right side of the speedometer and turn off the ignition. After that, press and hold the "00" button and turn on the ignition of the vehicle in the first position, at this point a count down will appear on the information display, so continue to hold the "00" button until the countdown expires to perform the reset and complete the job.

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the ECU located in the Peugeot 3008 Hybrid?
Where is the ECU located in the Peugeot 3008 Hybrid?
Peugeot 3008 (2016-2023 / MK 2, P84) In this tutorial, you can see where the engine ECU is located in the Peugeot 3008 Hybrid, useful if you need to replace it. As shown, the ECU is posi…
Where is the MAF Sensor on the Peugeot 3008 Hybrid?
Where is the MAF Sensor on the Peugeot 3008 Hybrid?
Peugeot 3008 (2023-2026 / P64) For the Peugeot 3008 Hybrid with the 1.6 Puretech petrol+electric engine, the MAF (mass air flow) sensor is located in a slightly different position …
How to Manually Reset the Service Light on a Peugeot 3008
How to Manually Reset the Service Light on a Peugeot 3008
Peugeot 3008 (2023-2026 / P64) To manually reset the service light on your latest Peugeot 3008, follow the procedure described in this mini guide. First, get inside the vehicle and…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the message "Anti-pollution system fault" mean in the Peugeot 3008? Read answer
    • 3008 2009-2016 - Why does the display of the Peugeot 3008 not work? Read answer
    • 3008 2016-2023 - Why does the Peugeot 3008 screen not light up? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos