Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light of a Peugeot 208?

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tail light

To disassemble the rear light of your Peugeot 208, start by opening the rear hatch. Look for the fixing screws around the perimeter of the light. Take a suitable screwdriver and carefully unscrew these screws. Once the screws are removed, check if there are fixing clips around the edge of the light. Use a soft tool, such as a plastic spatula, to gently detach these clips. Be careful not to damage the surrounding bodywork. Once the clips are unlocked, the light should be able to be removed carefully. Pull the light gently outwards to completely separate it from the bodywork. Finally, disconnect the electrical connectors connected to the light, and we will have finished the disassembly.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of the Peugeot 208?
How to Remove the Rear Light of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, see how to remove the rear light of the Peugeot 208, useful if you need to replace a bulb or the light itself. No special tools are…
How to Remove the Rear Light from a Peugeot 208
How to Remove the Rear Light from a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Here's how to remove the rear light from a Peugeot 208. Open the boot and secure it (using the automatic strut); locate the securing screws for the r…
How to disassemble the rear headlight of the Peugeot 208 2017
How to disassemble the rear headlight of the Peugeot 208 2017
Peugeot 208 (2012-2019 / A9, MK 1) In the following guide you will find all the steps you need to follow in order to dismantle the entire rear light of your Peugeot 208 (2017). First o…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos