Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Peugeot 208 2017

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tail light

In the following guide you will find all the steps you need to follow in order to dismantle the entire rear light of your Peugeot 208 (2017). First of all, go to the rear area of the car and lift the hood, then remove the small protective grille located on the side of the trunk. Immediately after removing the grille in question, disconnect the electrical cable and unscrew the safety hook by rotating it counterclockwise. Once you have done this, return to the outside and pull the entire rear light towards you until it is completely disassembled.

Posted on 6 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear headlight of the Peugeot 208
How to disassemble the rear headlight of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In the following guide, we will describe the entire procedure that you need to follow in order to disassemble the rear light of your first series Peu…
How to disassemble the front headlight of the Peugeot 208
How to disassemble the front headlight of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you want to correctly and safely disassemble one of the rear lights of your first series Peugeot 208, just follow all the steps described in our n…
How to disassemble the rear headlight of the Peugeot 208
How to disassemble the rear headlight of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In the following guide, we will explain the steps you need to take in order to safely remove one of the rear lights of your first series Peugeot 208.…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos