Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tail light

Here's how to remove the rear light from a Peugeot 208. Open the boot and secure it (using the automatic strut); locate the securing screws for the rear light; open the plastic inspection cover (located in the boot) and unscrew all the screws holding the light in place. Use a lever to detach the light from its housing and disconnect the power connectors. After replacing the damaged light with a new one, fit the new light into the car's body and replace the bulbs (ensure they are the same size and voltage). Finally, test the correct operation of the bulbs you installed with the new light.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of the Peugeot 208?
How to Remove the Rear Light of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, see how to remove the rear light of the Peugeot 208, useful if you need to replace a bulb or the light itself. No special tools are…
How to disassemble the rear headlight of the Peugeot 208 2017
How to disassemble the rear headlight of the Peugeot 208 2017
Peugeot 208 (2012-2019 / A9, MK 1) In the following guide you will find all the steps you need to follow in order to dismantle the entire rear light of your Peugeot 208 (2017). First o…
How to disassemble the rear headlight of the Peugeot 208
How to disassemble the rear headlight of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In the following guide, we will describe the entire procedure that you need to follow in order to disassemble the rear light of your first series Peu…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos