Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight Bulb of a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Headlight bulb

Before starting, open the bonnet of your Peugeot 208. Begin by unclipping and removing the rear cover of the bulb by simply pulling it outwards. Next, disconnect the electrical connector that powers the blown bulb. This will bring you to the blown bulb itself. Proceed to unclip it from its housing. Once you have completed this step, you can extract and remove the blown bulb, successfully completing the removal.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of a Peugeot 208?
How do you replace the headlight bulb of a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the headlight bulb of the Peugeot 208 by opening the hood, allowing access to the internal cover panel of the headligh…
How to Replace the Front Headlamp Bulb on a Peugeot 208
How to Replace the Front Headlamp Bulb on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) These brief and simple steps will show you how to remove and replace the dipped beam bulb of the front headlamp on a Peugeot 208. First, open the bon…
How do you replace the front headlight bulb of the Peugeot 208?
How do you replace the front headlight bulb of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the headlight bulb of the Peugeot 208, you need to open the hood so that you can access the components located inside the engine compartme…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos