Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 208
    4. : How to replace the headlight bulb on the Peugeot 208.

Peugeot 208 - Video tutorial

Model: Peugeot 208 MK 1, A9 - Years 2012-2019
Part: Headlight bulb
Operation: How to replace the headlight bulb on the Peugeot 208.

In this video tutorial, we will see how to disassemble and replace the headlight bulb of the Peugeot 208, following the instructions below. First, we open the hood of our car and start by removing the plastic protective cap of the bulbs. Then, we disconnect the electrical connector and release the metal clip to remove it from the optical group, as shown in the video. At this point, we proceed to install the new low beam or high beam bulb, of the correct type and with the same attachment (in this case, a new LED bulb is installed)!


Posted on 11 October 2023 by ScegliAuto



How do you replace the rear headlight bulb of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) In order to replace the rear headlight bulb of the Peugeot 208, you need to open the hood so that you can detach the plastic panel on the side of the
Peugeot 208 headlight bulb replacement
Peugeot 208 (2012-2019 / MK 1, A9) Replace the headlight bulb? Let's see how to replace the bulb from inside the headlight of a Peugeot 208. We open the hood of the engine compartment,
Replacement of the front headlight bulbs of the Peugeot 208
Peugeot 208 (2019-2024 / UP, UJ, UB, MK 2, UW) When a headlight bulb of the Peugeot 208 burns out, we must, for our safety, replace it, also to avoid sanctions. We open the hood of the engine comp

    Frequently Asked Questions

    • 208 2012-2019 - How do I change the headlight bulb on the Peugeot 208? Read Answer

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos