Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tail light

In the following guide, we will describe the entire procedure that you need to follow in order to disassemble the rear light of your first series Peugeot 208 on your own. First of all, remember to park the car on a flat surface, then turn it off completely and go outside. Position yourself at the rear hood and lift it completely, then remove the grid located on the side of the trunk. At this point, disconnect the electrical cable and unscrew the safety hook. Finally, pull the light towards you until it is completely disassembled.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light on Peugeot 208
Replacing the Rear Light on Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this guide, we will cover the main instructions on how to remove and replace the rear light on a Peugeot 208. First, open the rear boot lid and st…
How to Replace the Rear Fog Light on a Peugeot 208
How to Replace the Rear Fog Light on a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this brief guide, discover the steps to remove and replace the rear fog light on a Peugeot 208. First, move to the rear of the vehicle and gently …
How to Remove the Rear Light of the Peugeot 208?
How to Remove the Rear Light of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, see how to remove the rear light of the Peugeot 208, useful if you need to replace a bulb or the light itself. No special tools are…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos