Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlamp of a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tail light

This guide describes the procedure for removing the rear headlamp of your Peugeot 208. First, ensure the car is parked safely and completely turned off, then proceed to open the boot and remove the small plastic grille located on the side of the boot. Once done, disconnect the electrical connector and then unscrew the safety bolt present. This way, you have freed the headlamp, so simply pull it towards you to complete the removal.

Posted on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light from a Peugeot 208
How to Remove the Rear Light from a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Here's how to remove the rear light from a Peugeot 208. Open the boot and secure it (using the automatic strut); locate the securing screws for the r…
How to Remove the Rear Light of the Peugeot 208?
How to Remove the Rear Light of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, see how to remove the rear light of the Peugeot 208, useful if you need to replace a bulb or the light itself. No special tools are…
How to replace the rear headlight bulb of the Peugeot 208
How to replace the rear headlight bulb of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you want to replace the rear headlight bulb of your first series Peugeot 208 by yourself, you must follow all the steps described in this new guid…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos