Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the external rearview mirror of the Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Side mirror

Today we will discover the guide and steps that will allow us to disassemble and replace the external rearview mirror of the Peugeot 3008. First, we open the front door of the car and start disassembling and removing the door panel; to do this, we unscrew all the fixing screws, levering on the sides to detach and remove it, as shown in the video. At this point, we unscrew the screws of the rearview mirror, disconnecting the electrical connector to remove it; we install the new mirror, adjusting the glass and finally reassembling the door panel!

Posted on 24 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2016-2023 / MK 2, P84) This is a simple and quick DIY task. If the external wing mirror on your Peugeot 3008 breaks, likely due to an impact, do the following: Insert two f…
Peugeot 3008 (2009-2016 / T84, MK 1) Today we will discover step by step instructions on how to disassemble and replace the external rearview mirror of the Peugeot 3008. First, we open t…
Peugeot 3008 (2016-2023 / MK 2, P84) These short and simple steps will show us the procedure for disassembling and replacing the turn signal bulb of the external rearview mirror of the P…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos