Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil filter of the Peugeot 3008 2017

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Oil filter

In the following mini guide dedicated to all of you who own a second generation Peugeot 3008 (year 2017), we will discover together how to correctly replace the engine oil filter. First of all, you must park the car on a flat road for safety reasons, then make sure the engine is cold and then focus your attention on the lower area of the engine compartment. Locate the protective panel and remove it to access the oil filter. Finally, replace the old filter with a new one and the procedure is successfully completed.

Posted on 24 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter on the Peugeot 3008
How to replace the engine oil and oil filter on the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the engine oil and oil filter on the Peugeot 3008 is a simple operation that can be done independently. To perform the oil replacement, we …
How to change the engine oil and filter of the Peugeot 3008.
How to change the engine oil and filter of the Peugeot 3008.
Peugeot 3008 (2009-2016 / T84, MK 1) On the Peugeot 3008, the oil and filter change is performed by working both from the engine compartment and from underneath the car. First, the hood …
How to change the air filter of the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) In order to change the air filter of your Peugeot 3008 by yourself, you must carefully read the following guide and follow the various steps in the c…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos