Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Oil filter

Replacing the oil filter on a Peugeot 3008 is a straightforward task. First, open the bonnet and disconnect the vacuum sensor as shown in the video, then disconnect the vacuum hose. Next, unscrew the clamps and the intake hose, loosen the clamps connecting the air duct to the compressor, and disconnect the base hose. Disconnect the air intake hose from the air filter and unscrew the cap of the filter housing along with the old filter. At this point, unscrew the oil cap and let it drain out. Once all operations are completed, insert a new filter and screw the cap back on, reconnect the previously removed parts, and pour 4.25 litres of new oil into the reservoir.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel filter of the Peugeot 3008 1
Replacement of the fuel filter of the Peugeot 3008 1
Peugeot 3008 (2009-2016 / T84, MK 1) To replace the diesel filter of the Peugeot 3008, open the hood, remove the engine cover, disconnect the electrical connector and the three fuel line…
How to change the engine oil and filter of the Peugeot 3008.
How to change the engine oil and filter of the Peugeot 3008.
Peugeot 3008 (2009-2016 / T84, MK 1) On the Peugeot 3008, the oil and filter change is performed by working both from the engine compartment and from underneath the car. First, the hood …
How to replace the engine oil and oil filter on the Peugeot 3008
How to replace the engine oil and oil filter on the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the engine oil and oil filter on the Peugeot 3008 is a simple operation that can be done independently. To perform the oil replacement, we …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos