Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil and filter of the Peugeot 3008.

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Engine oil

On the Peugeot 3008, the oil and filter change is performed by working both from the engine compartment and from underneath the car. First, the hood is opened, and the area of the oil filler cap and filter is located, preparing everything before going under the vehicle. The central part of the procedure on the Peugeot 3008 takes place from underneath: with the pan positioned correctly, the drain plug of the oil pan is unscrewed, allowing the used oil to drain out. Once the draining is complete, the oil filter is addressed, which is accessed and unscrewed, keeping in mind that residual oil may still come out from there. Before installing the new filter on the Peugeot 3008, the seat is cleaned, and the filter is prepared to ensure a proper seal for the gasket. The new filter is then screwed into position without forcing, guiding it until it is snug. Once the lower part is completed, we return to the engine compartment of the Peugeot 3008 for topping up the new oil. The video shows the pouring of oil from the filler cap and, at the end of the operation, the level is checked to ensure it is correct.

Posted on 16 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the engine oil and oil filter on the Peugeot 3008 is a simple operation that can be done independently. To perform the oil replacement, we …
Peugeot 3008 (2016-2023 / MK 2, P84) In this video we can see the disaster of the timing belt of this Peugeot 3008, which is literally falling apart and the debris is all in the oil filt…
Peugeot 3008 (2009-2016 / T84, MK 1) Today's information is essential to understand when and how to carry out routine maintenance on the Peugeot 3008 1.6 HDi, which particularly involves…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos