Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace a cabin filter on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Cabin air filter
Operation: How to replace a cabin filter on Peugeot 3008

How to replace a cabin filter on Peugeot 3008? We open the door, enter the passenger compartment. With a plastic lever we peel off the coating placed on the side of the dashboard. Let's get a screwdriver or a cordless drill, open the glove compartment and unscrew the tightening screws around the perimeter with a screwdriver. Once this operation has been carried out, we go to remove the glove compartment and disconnect the power cables. We extract the passenger compartment filter from its housing, insert the new piece into the filter holder, reassemble all the components of the glove compartment as we previously removed.


Posted on 16 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the Peugeot 3008 cabin air filter located? Read Answer
    • 3008 2016-2023 - Where is the cabin filter of a Peugeot 3008 located? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 antipoline filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos